home *** CD-ROM | disk | FTP | other *** search
- Path: fstgal00.tu-graz.ac.at!not-for-mail
- From: mb@sime.com (Martin Bene)
- Newsgroups: comp.dcom.modems
- Subject: Re: USR Courier on leased line problems
- Date: Sat, 10 Feb 1996 15:16:50 GMT
- Organization: Graz University of Technology, Austria
- Message-ID: <4fieb1$g6@fstgal00.tu-graz.ac.at>
- References: <4essp6$aj2@Waldemar.mat.uni.torun.pl>
- NNTP-Posting-Host: carib.sime.com
- X-Newsreader: Forte Free Agent 1.0.82
-
- rzm@mat.uni.torun.pl (Rafal Maszkowski) wrote:
-
- >I'm trying to use Couriers with leased line, using the setting
- >described on F-15 - F-16 manual pages (at&b1&s2&h1&l1&w) and it works
- >until something bad happens on the line and the modems disconnect. If
- >they are able to reconnect after few tries they go on but after more
- >unsuccessful retries the modem doesn't try to beep to the other one any
- >longer. Upgrading to Novemeber version of the software didn't help.
-
- Unfortunately, no; What I do have, however, are even worse problems:
-
- I've got 4 USR Courier modems; 2 US/Canada and 2 International models.
-
- First, the good news: the US Modems work fine on a leased line at
- 33.6K, including reestablishing connection after line problems.
-
- The other two dont't work at all in leased line mode, period. I've
- tried both the Flashcode in SDLPALLA.EXE (SDL76AE.EXE) and the older
- SDL_INTL code.
-
- Same problems: the modems go offhook after being turned on, start
- handshaking and never establish a connection; they just sit there
- screaming at each other.
-
- Line problems shouldn't come into this: the modems are in the same
- room, connected with about 3m of cable; same setup for all 4 modems.
-
- >Any ideas?
-
-
- Bye, martin
-
-
-
-
-